<img src="https://secure.leadforensics.com/62829.png" style="display:none;">

FAQ

 

Frequently Asked Questions

Have questions? We are here to help!

Does the M&M bottom load valve system (BLVS) require special modifications to the top-drive or actuator?

No, the Upper and Lower valves make up to the top-drive and actuator exactly like the original equipment did.

Will our Varco top-drive replacement valves integrate with the M&M BLVS?

No, while the Upper and Lower valves bodies and their connections are dimensionally identical to the Varco valves, the M&M BLVS valves internal profile is unique. The M&M Lower valve has an extension or nose built on top of the pin connection and this extension mates into a unique ID profile in the Upper valve, holding the canister in place.

Where can I find parts list and/or other info on purchased items?

All product documentation can be found on M&M’s website by using our Product Documentation database. Just enter your products’ serial number to retrieve your respective information.

Where can I view my valves MTR, NDE, and hydrostatic test reports?

All product documentation can be found on M&M’s website by using our Product Documentation database. Just enter your product serial number to retrieve your respective information.

Do M&M’s valves come standard with H2S trim as some of our competitors do?

No, M&M offers both H2S and non H2S products. This allows M&M to offer our customers a more economically priced valve when H2S is not a concern.

What are standard delivery times?

Delivery times vary depending upon the size, end connections, and quantities of the valves being requested.

Do you repair your competitors’ valves?

In some cases we do repair and service our competitors’ products. Please contact our repair department to see if we currently handle repair of your particular valve type.

Do you sell repair kits?

Yes, M&M sells repair parts for all of our products.

Are M&M valves “full-opening” valves?

All of M&M’s quarter-turn ball valves are “fully opening” but not necessarily “full bore”. Customers should specify during the quoting process if they require a ball ID that matches the pipe ID.

Are M&M's valve internals interchangeable with our competitors’ internal parts?

No, M&M’s valves have a unique and patented design.

Do M&M valves test from the top and bottom?

Yes, all of our standard valve designs offer dual directional sealing.

Didn't find the answer you were looking for?

Reach out to us directly with any questions you may have. We will be happy to help!

Contact